Products › Instrument Division
Torqtech specializes in supplying field instrumentation for every P&ID requirement, from selection through to commissioning. We match the right level, flow, temperature and pressure instrument to your process conditions, and support it until it is running as designed.
Flowmeters and flow elements for liquids, gases and steam.
Measures the volume flow of conductive liquids with no moving parts and no obstruction in the line.
Measures liquid, gas and steam flow from the vortices shed behind a bluff body in the flow.
Compact meter that measures gas, steam or liquid flow from the frequency of a swirling flow pattern.
Measures true mass flow and density directly, independent of fluid properties.
Measures liquid flow using ultrasonic signals, including clamp-on versions fitted outside the pipe.
Measures gas mass flow directly from heat transfer, with no separate pressure or temperature correction.
Averaging-type primary element used with a differential pressure transmitter, mainly in large lines.
Direct-reading flow indicator in which a float rises with flow; glass-tube and all-metal types.
Measures clean liquid and gas flow from the speed of a turbine rotor in the stream.
Meters viscous liquids by trapping and counting fixed volumes as they pass through the meter.
Primary element that creates a differential pressure across the line for use with a differential pressure transmitter.
Detects the presence or absence of flow, or a set flow value, and switches a contact.
Continuous transmitters and point switches for liquids and bulk solids.
Non-contact radar measuring liquid and solid level, unaffected by vapour, temperature or pressure changes.
Sends radar pulses along a probe to measure level and interface in liquids and some solids.
Non-contact level and distance measurement using ultrasonic pulses.
Non-contact laser measurement of level or distance where a narrow, precise beam is needed.
Submersible sensor that measures level from the pressure of the liquid column above it.
Differential pressure transmitter set up to infer level in closed or pressurised vessels.
Point level switch that detects liquid from the change in vibration of a tuning fork.
Point level switch for powders and granular bulk solids, using a vibrating rod.
Senses a change in capacitance to detect level of liquids and bulk solids.
Chamber mounted on the vessel with a magnetic float that drives a flag indicator showing level.
Level measured through a float or displacer riding in the liquid, for local control and alarm duty.
Sensors, transmitters and assemblies for process and utility service.
Compact transmitter fitted in the sensor connection head to convert RTD or thermocouple signals.
Transmitter in a rugged field housing with local display, installed directly on the plant.
DIN-rail transmitter for panels and cabinets.
Platinum resistance temperature detector (Pt100 and others) for stable, repeatable readings.
Two-metal junction sensor for wide, high temperature ranges and fast response.
Complete assembly: sensor insert, protective thermowell and connection head.
Small, fast sensor for temperature sensing, control and compensation.
Measures process temperature from the outside of the pipe, with no thermowell and no shutdown.
Local mechanical thermometer with a dial, requiring no power.
Switches a contact when temperature reaches an adjustable set point.
Pressure, differential pressure and gauge instruments for process and utility service.
Converts process pressure into a standard electrical signal for control systems and local indication.
Measures the difference between two pressure points, for flow, closed-tank level and filter condition.
Measures pressure relative to atmosphere; a compact choice for general plant loops.
Transmitter isolated from the process by a diaphragm seal, for hot, viscous, corrosive or clogging media.
Pressure transmitter with a ceramic sensing element, resistant to abrasion and good for vacuum.
Sanitary connections and cleanable surfaces for food, beverage and pharmaceutical lines.
Measures differential pressure, static pressure and process temperature in one device for mass flow calculation.
Compact sensing element for OEM equipment and harsh media where a full transmitter is not needed.
Local mechanical dial gauge for direct pressure reading, requiring no power.
Switches a contact when pressure reaches an adjustable set point.
Valve manifolds and fittings for isolating, equalising and venting transmitters.
No products match your search. Contact us and we will help.
Send us your P&ID or process data and we will recommend and supply the right product.
Request Information